M101A2 Trailer

How you built it

Re: M101A2 Trailer

Postby 83rdrecon » Wed Nov 11, 2009 8:48 pm

Nice! Post pics when you get it redone! I have the little 1/4 ton M100 jeep trailer to pull behind my H3
2008 H3 Savannah, GA
User avatar
83rdrecon
Trail Novice
Trail Novice
 
Posts: 38
Joined: Tue Jun 30, 2009 7:02 am
Vehicle: 2008 H3

Re: M101A2 Trailer

Postby hellz » Mon Nov 16, 2009 5:48 pm

JustinOK wrote:
Rich wrote:I want one in the worst way! :wall:



http://www.govliquidation.com/index.html

You can search by locations near you, or search for what you want and get it shipped to you. Shipping a trailer would be more than what you win it for though. Now if you're willing to drive to Barstow or Camp Pendleton, your options really open up. There's a few M105A2 trailers at Barstow right now. Them are nice.

Oh, there are 19 M101A1 trailers up for auction 9 miles from me (the Norman, OK location).



found 2 of those m105A going up for sale near me very shortly... hell might be able to work it out i can pick up while im at camp ripley for training (national Guard)
lol that would be sweet...
hellz
Trail Novice
Trail Novice
 
Posts: 15
Joined: Tue Sep 22, 2009 10:50 am

Re: M101A2 Trailer

Postby pohlease » Mon Nov 16, 2009 10:47 pm

if its a deal i'll buy one too.
2003 Redfire Metallic H2 Adventure Series
pohlease
Trail Rider
Trail Rider
 
Posts: 101
Joined: Sun Oct 04, 2009 8:20 pm
Location: Minnesota
Vehicle: 2003 H2

Re: M101A2 Trailer

Postby Jakester's Hummer » Tue Nov 24, 2009 8:16 am

Anybody know what's the difference between A1 and A2 ( other than the number), a bunch of A1s near me but no A2s.
Jake RIP 09-02-08
User avatar
Jakester's Hummer
Club Member
Club Member
 
Posts: 201
Joined: Sun Mar 25, 2007 11:06 am
Location: Durham NC
Vehicle: 06 H2

Re: M101A2 Trailer

Postby JustinOK » Tue Nov 24, 2009 8:50 pm

Jakester's Hummer wrote:Anybody know what's the difference between A1 and A2 ( other than the number), a bunch of A1s near me but no A2s.


The A2 might have been the addition of the surge brake assembly, and actually the A3 might have been the addition of the HMMWV style wheels and drum/hub assembly. Not totally sure.

Also, as it turns out, my trailer is actually an M116A2 chassis with a 101 body.
1998 TD 4 Door Hard Top (HMC4) w/ 91K miles
Updated block and loaded with parts from Hummer Parts Guy and Blue Hummer

HummerDan's Hardcore Skid Guards, Fender Guards, & Locking Fuel Doors; Ham (VHF/UHF) & CB radios; Predator RapTorq4 PCM; mechanical wastegate; Cepek Adjustable Shocks; D-Tech PMD.
Stanadyne Performance Formula every fill-up and ScanGauge II full time.
User avatar
JustinOK
Chapter President - Oklahoma
Chapter President - Oklahoma
 
Posts: 1120
Joined: Tue Aug 07, 2007 10:22 am
Location: Oklahoma City, OK
Vehicle: 98 TD HMC4

Re: M101A2 Trailer

Postby pohlease » Sun Dec 06, 2009 9:11 pm

Well I bought one! M101A1 (no surge brakes) 1300lbs Empty with a tilting bed. Cover and sides are removable.

Image
Image
Image
Image
2003 Redfire Metallic H2 Adventure Series
pohlease
Trail Rider
Trail Rider
 
Posts: 101
Joined: Sun Oct 04, 2009 8:20 pm
Location: Minnesota
Vehicle: 2003 H2

Re: M101A2 Trailer

Postby JustinOK » Sun Dec 06, 2009 10:40 pm

pohlease, looks great!!! I wish mine had the tilt bed feature, I bet it will come in handy for you.
1998 TD 4 Door Hard Top (HMC4) w/ 91K miles
Updated block and loaded with parts from Hummer Parts Guy and Blue Hummer

HummerDan's Hardcore Skid Guards, Fender Guards, & Locking Fuel Doors; Ham (VHF/UHF) & CB radios; Predator RapTorq4 PCM; mechanical wastegate; Cepek Adjustable Shocks; D-Tech PMD.
Stanadyne Performance Formula every fill-up and ScanGauge II full time.
User avatar
JustinOK
Chapter President - Oklahoma
Chapter President - Oklahoma
 
Posts: 1120
Joined: Tue Aug 07, 2007 10:22 am
Location: Oklahoma City, OK
Vehicle: 98 TD HMC4

Re: M101A2 Trailer

Postby pohlease » Mon Dec 07, 2009 9:07 am

Justin yours tilts to! if you look at where the box meets the frame in the front there is one bolt on each side. Undo the bolt and the trailer tilts. I am told most people remove the bolts and replace them with pins. Just so you know the trailers were never intended to be used for "dumping" the tilt feature was so they could be stacked on trailers with the tounge level.

stacked:
Image

here is someone elses trailer tilted:
Image
2003 Redfire Metallic H2 Adventure Series
pohlease
Trail Rider
Trail Rider
 
Posts: 101
Joined: Sun Oct 04, 2009 8:20 pm
Location: Minnesota
Vehicle: 2003 H2

Re: M101A2 Trailer

Postby JustinOK » Mon Dec 07, 2009 10:26 pm

Sweet, I think you may be right. 8) I might have to get some quick release pins instead of those bolts.


Thanks!
1998 TD 4 Door Hard Top (HMC4) w/ 91K miles
Updated block and loaded with parts from Hummer Parts Guy and Blue Hummer

HummerDan's Hardcore Skid Guards, Fender Guards, & Locking Fuel Doors; Ham (VHF/UHF) & CB radios; Predator RapTorq4 PCM; mechanical wastegate; Cepek Adjustable Shocks; D-Tech PMD.
Stanadyne Performance Formula every fill-up and ScanGauge II full time.
User avatar
JustinOK
Chapter President - Oklahoma
Chapter President - Oklahoma
 
Posts: 1120
Joined: Tue Aug 07, 2007 10:22 am
Location: Oklahoma City, OK
Vehicle: 98 TD HMC4

Re: M101A2 Trailer

Postby KS Trekker » Tue Oct 12, 2010 7:31 pm

I finally got to pick up my M101A2 today. It tows great behind the H3. I can't wait to load it down with some firewood! :)

Image
User avatar
KS Trekker
Club Member
Club Member
 
Posts: 644
Joined: Tue Jan 30, 2007 6:58 pm
Location: Olathe, Kansas
Vehicle: '07 H3 / '05 H2

Re: M101A2 Trailer

Postby JustinOK » Tue Oct 12, 2010 8:29 pm

Wow, that one looks great! Even your top looks brand new!! You found yourself a nice one.
1998 TD 4 Door Hard Top (HMC4) w/ 91K miles
Updated block and loaded with parts from Hummer Parts Guy and Blue Hummer

HummerDan's Hardcore Skid Guards, Fender Guards, & Locking Fuel Doors; Ham (VHF/UHF) & CB radios; Predator RapTorq4 PCM; mechanical wastegate; Cepek Adjustable Shocks; D-Tech PMD.
Stanadyne Performance Formula every fill-up and ScanGauge II full time.
User avatar
JustinOK
Chapter President - Oklahoma
Chapter President - Oklahoma
 
Posts: 1120
Joined: Tue Aug 07, 2007 10:22 am
Location: Oklahoma City, OK
Vehicle: 98 TD HMC4

Re: M101A2 Trailer

Postby Mark » Tue Oct 12, 2010 9:36 pm

Looks great behind the 3 8)
Hummer X Club Florida Chapter
mailto:florida@hummerxclub.com
User avatar
Mark
Chapter President - Florida
Chapter President - Florida
 
Posts: 15131
Joined: Sat Apr 29, 2006 5:42 pm
Location: Orlando FL
Vehicle: 09 H3 Alpha/74 Int. Scout

Re: M101A2 Trailer

Postby Seth » Tue Oct 12, 2010 10:02 pm

Mark wrote:Looks great behind the 3 8)

X2! Great looking trailer.
Keep your wits sharp, your heart open, and your gun loaded.
User avatar
Seth
Chapter President - SoCal
Chapter President - SoCal
 
Posts: 9621
Joined: Wed Jun 13, 2007 3:51 pm
Location: San Diego
Vehicle: JK Rubicon Unlimited

Re: M101A2 Trailer

Postby KS Trekker » Tue Oct 12, 2010 10:22 pm

Thanks guys. I'm thinking about putting some Duratracs on the trailer to match the H3. The tire size is 235/85/R16. I pulled a lot of these M101 trailers behind Hummer's in the Army and these things are unstoppable. I stopped by a set of truck scales and it weighs 1340 lbs.
User avatar
KS Trekker
Club Member
Club Member
 
Posts: 644
Joined: Tue Jan 30, 2007 6:58 pm
Location: Olathe, Kansas
Vehicle: '07 H3 / '05 H2

Re: M101A2 Trailer

Postby Bellvis » Wed Oct 13, 2010 12:36 am

Looks great KS!

Now paint your H3 to match!!!
Miss you Rich! Thank's for all the memories!
User avatar
Bellvis
Trail Master
Trail Master
 
Posts: 6779
Joined: Mon Jan 01, 2007 4:27 pm
Location: The Orange County, CA
Vehicle: The Boobicon

PreviousNext

Return to Builds

Who is online

Users browsing this forum: No registered users and 1 guest

cron